Wrightlease 2R is an extruded fluoropolymer film coated with rubber-based pressure sensitive adhesive. The light brown color is visible on most substrates in addition to offering high elongation and tensile strength.
• Provides excellent release from all common resin systems for multiple releases.
• Good adhesion to metal,
• High elongation allows for
• Non-silicone adhesive for sensitive applications.
|Maximum use temperature||400°F (204°C)|
|Carrier type||Extruded fluoropolymer|
|Adhesive type||Rubber (Light green)|
|Total thickness||0.0035 inch (88 µm)|
|Film thickness||0.002 inch (50 µm)|
|Adhesive thickness||0.0015 inch (38 µm)|
|Elongation at break||300 %|
|Shelf life||18 months from date of shipment when|
stored in original packaging at 72°F (22°C)
|1 inch (2.54 cm)||36 yards (33 m)||48 rolls per case|
|2 inches (5.08 cm)||36 yards (33 m)||24 rolls per case|
• Broken cases and other widths available on special order.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-10-07
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.