Greenflow 75 is designed to efficiently distribute resin with little waste due to the low profile, tight construction. Greenflow 75 can be used with polyester, vinylester and epoxy resins.
|Configuration of net||Extruded (Rhombic)|
|Maximum use temperature||302°F (150°C)|
|Melt point||320 °F (161 °C)|
|Mesh weight||98 g/m²|
|Shelf life||Unlimited when stored in original packaging at 72°F (22°C) |
|0.03 in (0.9 mm)||41 in (1.04 m)||350 ft (106.7 m)|
|0.03 in (0.9 mm)||60 in (1.5 m)||350 ft (106.7 m)|
• This product is an extruded mesh and does not fray when cut.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2019-04-23
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.