Tac-Strip is a fiberglass fabric mesh tape coated on both sides with a ''high-tack'' pressure sensitive adhesive. Tac-Strip is designed to hold dry fabrics in place as required when using resin infusion, resin transfer molding, and other processes requiring dry fabric lay-up. Tac-Strip has the added advantage of being very clean when compared to spray adhesives commonly used for ply placement.
|Material type||Fiberglass mesh|
|Maximum use temperature||212 °F (100 °C)|
|Shelf life||12 months from date of shipment when|
stored in original packaging at 72 °F (22 °C)
|0.008 inch (0.2 mm)||1 inch (2.54 cm)||295 feet (90 m)||54 rolls per case|
|0.008 inch (0.2 mm)||2 inches (5.08 cm)||295 feet (90 m)||24 rolls per case|
• Tac-Strip is an environmental friendly product which can be used instead of spray adhesives.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2021-01-21
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.