As with Airtech's Omega Flow Lines, OF 625V and OF 750V are also for use under the bag in single and double bag resin infusion applications, replacing spiral wrap polyethylene feeder lines. OF 625V and OF 750V are low cost, reusable, and made from translucent vinyl rubber.
Two sizes are available with internal diameters 0.625 in (16 mm) and 0.750 in (19 mm), suitable for use with common size polyethylene tubes. Airtech's Omega Flow Lines leave minimal or no mark off on the part when used in conjunction with Airtech's flow media and peel ply.
|Material type||Vinyl rubber|
|Service temperature||161 °F (71 °C)|
|Product reference||Internal Diameter||Length|
|OF 625V||0.625 inch (16 mm)||100 feet (30.5 m)|
|OF 750V||0.750 inch (19 mm)||100 feet (30.5 m)|
Vinyl Omega Flow Lines can be warmed to 120 °F (50 °C) to aid in conforming to contoured surfaces.
Last updated : 2019-04-18
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.